background image

SAFE USE GUIDELINES

DO NOT attempt to adjust any part of your bike or the 

R

EVOLUTION

 

while riding or sitting on the 

bike.

-

fessional’s aid in developing an exercise program suitable for your current health status.

muscles are warmed up, gradually increase the pedaling rate to a speed that allows you to attain 

your target training zone.
Always exercise in a well ventilated open area to maintain a safe core temperature. We recom-

mend using a fan to circulate air.
The speed and duration of your exercise program should always be subject to how you feel. Never 

permit peer pressure to exceed your personal judgment while exercising.
Overweight or severely unconditioned individuals should be particularly cautious when using 

physical problems, they may perceive the exercise to be far less intense than it really is, resulting 

in the possibility of overexertion or injury.
Although all equipment manufactured by LeMond Revolution LLC. has been thoroughly inspected 

by the manufacturing facility prior to shipment, proper assembly and regular maintenance are 

required to ensure safety. Maintenance is the sole responsibility of the owner.
When the 

R

EVOLUTION

 

is in use the fan and pulley assembly will be spinning at high speeds. For safe 

operation, allow at least three (3) feet (1m) of free space on all sides of the unit and the bicycle 

mounted on it. Failure to do so can cause serious injury.

The safety level of this equipment can only be maintained by following the guidelines in this manual and 

examining the equipment regularly for damage and wear. Damaged or inoperable components should 

be replaced immediately and the equipment should not be used until it is repaired.

Failure to follow all guidelines above may compromise your exercise experience, expose you and others 

to injury, and reduce the longevity of the equipment

SAVE THESE INSTRUCTIONS

Your comments and suggestions are welcome.  

Congratulations, and thank you for buying the R

EVOLUTION

.

Your LeMond Revolution Dealer:

Name:  ______________________________________________________________________________

Phone:   _____________________________________________________________________________

Your Serial Number:

____________________________________________________________________________________

5

Содержание Revolution 250202-2
























Отзывы: