background image

SAFE USE GUIDELINES

!

THIS SYMBOL AND/OR THE WORD “

WARNING

” IN BOLD INDICATE A POTENTIAL 

FOR PROPERTY DAMAGE OR PERSONAL INJURY. TAKE NOTE OF IMPORTANT OPER

ATING, SERVICING OR MAINTENANCE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS EXERCISE EQUIPMENT

!

THESE GUIDELINES ARE DIRECTED TO YOU, AS THE OWNER OF THIS EXERCISE 

EQUIPMENT. YOU SHOULD INSIST THAT ALL USERS FOLLOW THE SAME GUIDE

LINES. PLEASE MAKE THIS MANUAL AVAILABLE TO ALL USERS.

The 

R

EVOLUTION

in group or individual settings. Use this equipment ONLY for its intended use as described in this 

manual. 

DO NOT attempt to ride at high pedal speeds or in a standing position until you have practiced 

and are comfortable riding at slower pedal speeds.

This unit is NOT equipped with any type of brake system. If the fan and pulley are spinning let 

them spin freely until stopped. DO NOT attempt to stop the fan or pulley by hand, serious injury 

may occur.

The freehub system allows the fan and pulley to spin freely without pedal movement. DO NOT 

attempt to dismount the bike while the fan and pulley are spinning, wait for the 

R

EVOLUTION

 to 

coast to a stop.

Do not expose any part of your body or clothing to ANY moving parts (chain drive, pulley, belt 

drive, fan) as possible injury may occur.

Keep unsupervised children away from this equipment when not in use. 
Keep children and pets away from this equipment while in use.
Never drop or insert any object into any opening on the exercise equipment.

equipment. 

Follow the instructions for safe use of the equipment; including proper mounting of your bicycle.
Securely clamping the bike to the R

EVOLUTION

 with the cam action retention device takes consid-

stay or chain stay for leverage, the lever does not leave a clear imprint in the palm of your hand, 

and the serrations on the wheel fastener do not emboss the surfaces of the dropouts, the tension 

again.

IMPORTANT SAFETY INSTRUCTIONS

4

Содержание Revolution 250202-2
























Отзывы: