background image

RIDING THE REVOLUTION

!

WARNING:

 

USE CAUTION WHEN MOUNTING AND RIDING YOUR BICYCLE ON THE REVOLUTION 

FOR THE FIRST TIME. START PEDALING SLOWLY TO GET A FEEL FOR THE EQUIPMENT. RIDING 

THE REVOLUTION FEELS A LOT LIKE RIDING ON THE ROAD, BUT TAKES A FEW MINUTES TO GET 

USED TO. SHIFT THROUGH THE GEARS TO ENSURE CLEAN AND PROPER SHIFTING. IT SHOULD 

NOT BE NECESSARY TO ADJUST YOUR DERAILLEUR TO WORK WITH THE REVOLUTION, 

HOWEVER, SUBTLE DIFFERENCES IN BICYCLES EXIST AND MAY MAKE SHIFTING FEEL DIFFER

ENT. 

ADJUSTING THE FIT

If your bicycle is set up properly for your body then you should not need to make any adjustments prior 

R

EVOLUTION

. If you are unsure about the setup of your bicycle please visit your local 

bike shop prior to using it with your LeMond 

R

EVOLUTION

.

BASIC OPERATION

With your bike safely installed on the 

R

EVOLUTION

 (see instructions on p.11), mount the bicycle nor-

mally and begin to pedal.

!

WARNING: 

DURING YOUR FIRST USE OF THE REVOLUTION START PEDALING SLOWLY AT FIRST 

TO GET A FEEL FOR THE EQUIPMENT. SHIFT THROUGH THE GEARS ON YOUR BIKE AT A SLOW 

PEDALING PACE TO ENSURE OVERALL STABILITY PRIOR TO EXERTING HEAVY PEDAL FORCE.

We designed the 

R

EVOLUTION

 to be stable in all riding conditions, including standing up, however use 

caution when pedaling standing up as the bike and trainer can tilt and become unbalanced.
Just like riding outside, pedaling resistance on the 

R

EVOLUTION

 

is determined by how hard you pedal. 

If you want to train harder–pedal harder.

!

WARNING: 

IF AT ANY TIME DURING YOUR WORKOUT, YOU FEEL CHEST PAIN, EXPERIENCE 

SEVERE MUSCULAR DISCOMFORT, FEEL FAINT, OR ARE SHORT OF BREATH, STOP EXERCISING 

IMMEDIATELY. IF THE CONDITION PERSISTS, YOU SHOULD CONSULT YOUR MEDICAL DOCTOR 

IMMEDIATELY.

Before dismounting, allow the 

R

EVOLUTION

 to spin down and stop. The trainer is not equipped with a 

brake, and therefore the fan and pulley will continue to spin after pedaling has stopped. 

!

WARNING: 

DO NOT ATTEMPT TO SLOW OR STOP THE PULLEY OR FAN! ANY ATTEMPT TO SLOW 

OR STOP THE TRAINER CAN RESULT IN SERIOUS INJURY.

17

Содержание Revolution 250202-2
























Отзывы: