LELY 1250 PROFI, Руководство оператора

Страница: 27 / 56

3.6 Start Tedding
Make sure no persons are near the Lotus when you engage the PTO.
Make sure no persons are within a 25 meter radius of the Lotus during
operation.
Always switch off the tractor engine before you leave the tractor cab.
Do not operate the Lotus without safety guards or covers, or if the
safety guards or covers are damaged.
During the early stage of the process in particular, fast and airy tedding twice
a day at a low rotor speed is better than intensive tedding at a high rotor
speed.
Procedure
1. Operate the tractor hydraulic system to lift the rotors to the headland
position.
2. Carefully engage the PTO at the lowest possible engine speed.
3. Slowly increase the speed of the PTO to 400-450 rpm (max. 540 rpm).
Do not drive the machine through the crop when the rotor is on the
ground and not rotating. This causes damage to the tines and tine
arms.
4. Drive the tractor at a maximum speed of 15 km/h and make sure:
• The hydraulic rams telescope smoothly.
• The PTO speed must not exceed the speed shown on the Lotus.
WARNING
Note:
WARNING
Operation 3-11
T-H021.1301EN