Assembly instructions Changing table Basic freestanding with and without sink.
(Item.nr 35448, 35449 and 35450)
•
The changing table must be mounted on a free surface without nearby fixed obstacles on the
walls.
•
The floor must be stable and leveled.
•
Position the changing table so that there is no risk of squeezing adjacent objects. It is the
installer and the user's responsibility to position the changing table so that there is no risk of
squeezing. Remember that you as a user are responsible for ensuring that no one is harmed.
•
The distance to adjacent objects should be at least 50mm to avoid the risk of squeezing.
•
The adjustable feet on the stand are there to make it easier to get the changing table in
balance (horizontal position).
•
Electrical connection must be made via a standard 230V socket with timer.
This equipment must not be permanently connected to the mains.
•
Water and drains must be connected by a qualified installer.
•
The table must not be loaded with more than a maximum of 40kg in the
stationary position and 20kg in the driving position.
•
The changing table raising and lowering function must absolutely not be used
if the mounted ladder is in the extended position.
•
If any part of the changing table is damaged or if there is a suspicion of
damage, take the changing table out of operation immediately.
Disconnect the power supply and contact your supplier.
Use
The table is intended for care, laundry, diaper changes, etc. of small children in kindergartens,
preschools and similar functions.
•
All other use is prohibited and falls outside the product /
supplier’s
product
liability.
