9
3.7 Adjusting the ring volume
• When the headset is ringing to indicate an incoming call, you can adjust the ring
volume using the volume control buttons located on the headset . Your headset must
be turned off in order to adjust the ring volume
3.8 Muting the headset microphone
• To mute the headset microphone when on a call, press the mute button on the
headset (in between the volume buttons) . While the headset is in mute mode, a
short beep will be heard on the headset every 8 seconds . Press the mute button
again to unmute
3.9 Headset microphone volume setting
• You can increase or decrease your speaking volume by using the two buttons
located on the bottom of the charging base
3.10 Adjusting headset listening volume
• While on a call use the volume control buttons on the headset to adjust the listening
volume . You will hear a beep each time you adjust the volume up or down
3.11 Out of range and reconnection
• You will hear warning beeps in the headset when you walk out of range of the base .
If the headset disconnects due to being out of range, the call will not drop . The
headset will automatically reconnect when you are back in range
• NOTE: If you do not move back inside the base range within 5 minutes, the call will
be disconnected
