Leitch DMX-3901-A Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 64

Leitch DMX-3901-A Скачать руководство пользователя страница 33

18

DMX-3901-A Installation and Operation Manual

Chapter 3: Operation

Operation Notes

When using the DMX-3901-A module, observe the following operation
notes:
•

If you change parameters within 16 seconds after the
DMX-3901-A banner first appears on the VFD, your changes will
not be saved. Parameter changes that you make after this 16-second
delay will be saved and restored if the module loses power and must
be restarted.

•

Although the effect of a parameter change may appear to be
immediate, the module requires 20 seconds to save the latest
change. If another change is made during these 20 seconds, the first
parameter change and the second parameter change will not be
saved until 20 seconds after the second parameter change. There is
no limit to the number of changes that can be made within 20
seconds of each other. However, none of these changes will be
saved until 20 seconds after the last parameter change.

•

When you set the

FctryRcl

(factory recall) parameter to

Yes

, the

module takes several seconds to reset all of the parameters. (

Setup

parameters are not affected by this factory recall mode.) The lists of

“Operator and All List Parameters” on page 22

Parameters” on page 39

indicate parameter default settings that are

restored when

FctryRcl

is set to

Yes

.

•

With some parameters, certain changes will cause additional
changes in other parameters. See

for more information on

these cross-functional parameter changes.

Caution

If you do not observe these
“Operation Notes”, you may
accidentally change your
parameter settings.

«
...
31
32
33
34
35
...
»

Содержание DMX-3901-A

































































Отзывы:

Нет отзывов