Leitch DMX-3901-A Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 64

Leitch DMX-3901-A Скачать руководство пользователя страница 12

DMX-3901-A Installation and Operation Manual

ix

Preface

Unpacking the Module

Before you install and configure NEO modules, follow these steps:
1. Check the equipment for any visible damage that may have

occurred during transit.

2. Confirm that you have received all items listed on the packing list.
3. Remove the anti-static shipping pouch, if present, and all other

packaging material.

4. Retain the original packaging materials for possible reuse.
5. Contact your Leitch sales representative if parts are missing or

damaged.

Keep at least one set of original packaging in the event that a product
needs to be returned for service. If the original package is not available,
you can purchase replacement packaging from Leitch Technology.
Otherwise, you can supply your own packaging as long as it meets the
following criteria:
•

The packaging must be able to withstand the product’s weight.

•

The product must be held rigid within the packaging.

•

There must be at least two inches (five centimeters) of space
between the product and the container.

•

The corners of the product must be protected.

If the product is still within the warranty period, Leitch Technology will
return it to you by prepaid shipment after servicing.

Safety Standards and Compliances

See the

NEO Safety Instructions and Standards Manual

to find the

safety standards and compliances for this NEO product. A safety
manual is shipped with every

FR-3901, FR-3903, and FR-3923

Mounting Frames Installation and Operation Manual

and can be

downloaded from

. Alternatively, contact your Leitch

customer service representative for a copy of this safety manual.

«
...
10
11
12
13
14
...
»

Содержание DMX-3901-A

































































Отзывы:

Нет отзывов