manualshive.com logo in svg

Leister WELDPLAST 600, Руководство пользователя, Страница: 27 / 40

Поделиться
Скачать
Leister WELDPLAST 600 Скачать руководство пользователя страница 27

27

9.5  Eco mode

Switched off at the factory 
•  Enable Eco Mode by pressing the 

Confirm button (33)

 The

•  time interval for the Eco and Standby timer can be individually configured by 

selecting the value to be edited with the 

Minus/Plus (32)

 buttons

•  after pressing the 

Confirm (33)

 button, the desired value can be set individually 

with the 

Minus/Plus (32)

 buttons

•  By pressing the 

Confirm (33)

 button, the set value is accepted

If the extruder remains under the time period specified in the ECO timer when the 

Eco mode is activated, a change to Eco mode occurs automatically. The air volume 

is automatically reduced to the minimum and the target air temperature is reduced 

by 30°C. In the working display, eco mode is displayed with the corresponding 

symbol.

The operating state can be reactivated at any time with the drive button (17)

 or one of the three buttons.

After the standby timer has expired without any activity, the cooling process is 

initiated. To interrupt the cooling process, press the 

Heating On/Off button (31

).

If Eco mode is activated, the plastic heating is switched on first during the heating up process. The air heater 

is still switched off. When the plastic heater reaches the ACTUAL temperature of 20°C before the set TARGET 

temperature, the 5 minute countdown timer of the extruder starts. At the same time, the air heater is switched on. 

Both heaters are ready for plastic and air until the end of the countdown timer. The air volume is activated as set.

ECO timer

Standby timer

Содержание WELDPLAST 600









































Отзывы:

Нет отзывов