26
You can adjust the parameters of your own recipes at any time.
To do this, in the menu Recipes select the submenu Edit by pressing the
Minus (32)
button.
After pressing the
Confirm button (33),
all editable recipes are displayed.
Use the
Minus button (32)
to select the recipe to be edited and press the
Confirm button (33
).
Use the
Minus button (32)
to select the parameter to be edited and press the
Confirm button (33
).
You can now set the desired value with the
Minus/Plus (32)
buttons.
Pressing the
Confirm (33)
button accepts the set value.
To save the setting, use the
Minus button (32),
select the Save Recipe menu item, then press the
Confirm button
(33).
9.4 Displaying nominal values (Set values)
Factory activated
If you do not wish to display the setpoint and actual value on the working display,
you can deactivate Set Values by pressing the
Confirm (33)
button.
If the Set Values function is activated (factory setting), the actual temperature (high)
and the target temperature (low) are shown in the work display.
This also applies to plastic extrusion (%) and air volume (%).