Leister WELDPLAST 600 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 40

Leister WELDPLAST 600 Скачать руководство пользователя страница 16

16

QG WELDPLAST 600/605 / Art. 170.895 / 06.2021

User Manual:

leister.com

/DLP-Weldplast-605

WELDPLAST 600/605

Quick Guide

Download

myLeister App

6 min

10 min

7. Quick Reference Guide WELDPLAST 600/605

7.1 Switching on/Starting

7.2 Switching off

1. Ensure that the

main switch (18)

is switched off and connect the plug from the power cable

2. Switch on the

main switch (18).

3.

Switch on the heating with the

heating On/Off (31) button;

wait 10 minutes until the desired temperature is

reached and the drive is released.

4. Guide the welding rod into the

welding rod entry point (11)

and switch on

the plastic drive (16) with

the

drive on/off switch

1.  Cut off the welding rod.
2.  Clean the opening of the welding shoe when the plastic drive is switched off.
3.   Switch off the heating

with the Heating On/Off button (31)

and wait for the cooling process to finish (approx.

5 minutes).

4.

Switch off the main switch (18)

.

Caution:

Jacket heating remains hot for some time.

5. Pull out supply voltage plug

«
...
14
15
16
17
18
...
»

Содержание WELDPLAST 600









































Отзывы:

Нет отзывов