manualshive.com logo in svg

Leister UNIROOF 300, Руководство пользователя, Страница: 49 / 59

Поделиться
Скачать
Leister UNIROOF 300 Скачать руководство пользователя страница 49

49

QG UNIROOF 300/700 / Art. 169.182 / 09.2021

User Manual:

leister.com

/uniroof-700

UNIROOF 300/700  

Quick Guide

Download

myLeister App

5 min

1.  Swivel the 

hot-air blowers (10) upwards (stops the drive motor).

2. 

Switch off the heating with the 

Heating On/Off (31)

 button.

3.  Wait for the end of the cool-down process (approx. 5 minutes).
4. 

Switch off the main switch (19).

5.  Pull out supply voltage plug

1.  Make sure that the 

main switch (19)

 is switched off and the 

hot-air blower (10)

 is in  

parking position. Connect the supply voltage plug.

2.  Switch on the 

main switch (19).

3. 

Switch on the heating with the 

Heating On/Off (31) 

button;

 

wait 3–5 minutes until the desired temperature 

is reached. 

4.  Swivel the 

hot-air blower (10) downwards (machine starts automatically).

14.2 Switching off

14.1 Switching on/Starting

14. Quick Reference Guide UNIROOF 300

Содержание UNIROOF 300




























































Отзывы:

Нет отзывов