43
To delete the day counter, select the menu item Trip Distance by pressing the
Minus (32)
button. Press the
Con-
firm (33)
button and then the
Plus (32)
button. Pressing the
Confirm (33)
button again deletes the day counter.
Select the Duty Info menu item in the menu by press-
ing the
Minus (32)
button. Then press the
Confirm (33)
button.
The runtimes of the machine, the drive and the blower
are displayed.
In the two lines below, you can see the distances
traveled as a day counter and as total run time. The
day counter can be deleted.
To activate Info Mode, proceed as
follows:
Select the Info Mode menu item in the menu by press-
ing the
Minus (32)
button.
The Info Mode is activated by pressing the
Confirm
(33)
button.
Switched off at the factory
If Info Mode is activated, additional information is displayed at the work level.
The following information is displayed:
• Speed in a resolution of 1 cm/min
• Capacity utilization of the heating output in percent as well as the temperature in
1°C resolution
• Ambient temperature
• Supply voltage in 1V resolution
10.11 Duty information
10.10 Info Mode
Содержание UNIROOF 300
