19
1. Select and confirm the symbol Open recipe [
Function display (28)
,
e-drive (27)
].
2. Use the
Up
and
Down keys (22/23)
or the
e-drive (27)
to set the cursor to the desired recipe and confirm with
the
e-drive (27).
• If you change setpoints in user-defined recipes during operation, they are not saved. When the device is
restarted, the values saved in the recipe will be displayed again.
• If you wish to apply the most recently used setpoints when you restart the device, you have to select the
preprogrammed BASIC recipe.
• The currently selected recipe is selected in the
Status display area 1 (30)
. The BASIC recipe is an exception.
If BASIC is selected, only the mains voltage appears in the
Status display (30
).
1. Setting up the desired setpoints [
Working display (29)
,
e-drive (27)
].
2. Select and confirm symbol Settings [
Function display (28)
,
e-drive (27)
]
3. Select and confirm menu Recipes [Menu selection,
e-drive (27)
]
4. Select and confirm menu User-defined [Menu selection,
e-drive (27)
]
5. Select and confirm symbol Edit [
Function display (28)
,
e-drive (27)
]
6. Enter desired recipe name, see Enter recipe name [8.3]
7. Select
8. Select and confirm [8.3]Save symbol [
Function display (28)
,
e-drive
].
Your newly created recipe is now saved and can be accessed at any time under the name that has been input.
Your COMET 700 has more than 9 freely definable recipes and the BASIC recipe available.
Save Recipes saves the currently set target values of the drive and hot-wedge temperature welding parameters
under a user-definable name (max. 12 characters), see Entering recipe names [8.3].
Load existing recipe
Creating a new recipe
8.2. Setting up, saving, and selecting recipes (Save recipes)
