Manual Network Configuration
If your network does not use a DHCP server, obtain an approved static IP, subnet mask, and gateway from your network
administrator.
The IncodeX Stream uses a default static IP address of 169.254.31.2 if a DHCP server is not detected on the network.
Removing your DHCP enabled Windows PC from the network will cause the PC to default to a 169.254.x.x static
IP address. If the PC does not default to the static IP address of 169.254.x.x after doing this, contact your network
administrator or LEIGHTRONIX technical support for help setting up a static IP address on your PC.
Firewall Considerations
Connect the IncodeX Stream’s Ethernet port to the Ethernet
port on your laptop or PC with an Ethernet cable.
Open a web browser.
In the address bar, enter the IncodeX Stream’s default static
IP address, 169.254.31.2, and press enter.
In lowercase, enter “admin” into the “Username” field and
“stream” into the “Password” field of the login prompt. Click
“Ok” to login.
Stop the IncodeX Stream from encoding by clicking the
“Stop Encoder” button.
Select the “Static” mode from the first “Network Settings”
drop-down box.
Enter the IP, subnet mask, and gateway information into the
corresponding fields.
NOTE:
Be sure to write down your static
IP address in a known location so that it is available if needed.
This information will be required to access your IncodeX Stream’s
interface in the future.
Click the “Apply Settings” button. The IncodeX Stream will
automatically reboot to apply the network address changes.
Disconnect the Ethernet cable from your computer or laptop, and
then connect it to your network.
Network Configuration
Support & Product Registration
Function
Destination
Port(s)
Network Traffic
Configuration sync/
subscription validation
license.leightronix.com
80
HTTP/TCP
DNS (name translation)
67.227.136.122
53
DNS/UDP
Time sync
time.leightronix.com
123
NTP/UDP
VieBit live streaming
Origin server*
Origin port**
UDP
* Check the VieBit “Live Streams” page and click “Info” for the origin server information.
** Check the VieBit “Live Streams” page and click “Info” for the origin port number.
© 2019 LEIGHTRONIX, INC. All rights reserved.
The information in this manual is subject to change without notice.
IncodeX Stream
and
VieBit
are trademarks of LEIGHTRONIX, INC.
LEIGHTRONIX, INC.
1125 N Cedar Rd | Mason, MI 48854
Phone: (800) 243-5589 or (517) 694-8000 | Fax: (517) 694-1600
www.leightronix.com
2/4/19
Support
At LEIGHTRONIX, every customer of our standard product
line receives technical support at no extra charge. There are
no service contracts, no annual renewals, no allowances, no
deductibles, and no exclusions.
In addition to a 5 year hardware warranty, benefits include
access to:
• Priority toll-free telephone support
• Email support
• Online support, desktop to desktop via Webex
®
• Software updates
• Firmware updates
• Assistance with updates
Looking for firmware/software or additional documentation? Go
to
www.leightronix.com/support.html
to download important
updates and full product manuals.
Phone:
(800) 243-5589
Email:
2
Automatic Network Configuration
The IncodeX Stream is shipped with Dynamic Host Configuration Protocol (DHCP) enabled and will automatically
configure the unit with an IP, subnet mask, and gateway from your network’s DHCP server if available. This information
can be found on the “Live Streams” page of the VieBit account under “Info.”
2
.a
2
.b
2
.c
2
.d
2
.e
2
.f
2
.g
2
.h
2
.i
PRODUCT
QUICK GUIDE
Hardware Setup | Network Configuration | VieBit
™
Login and Advanced Interface Settings
END-TO-END
Solutions for
Broadcast & Streaming
For the IncodeX Stream to communicate outside of an internal network, your network needs to be configured using the
specifications below.
