WINDMILL TRIPOD FLEUR DE LIS, RUSTIC
ITEM #: TX 93471, TX 93472
STEP 1
STEP 3
STEP 2
STEP 4
STEP 6
STEP 5
I
G
H
Connect top portion of legs (A1) to the bottom part (A2) until it
click into place.
Leg should face inwards, secure Top Mount Platform (B) to the top
of legs (A1) with Screws (J)
Place the Directional Cap (E) on the Top Mount Platform (B),
lock into place with the Needle (F).
Affix Side Panel (C) into place between Windmill Legs (A),
tighten with Bolt (K), Flat Washer (L), Spring Washer (M),
and Nut (N).
Assemble the Windmill Head (G, H, I), make sure the Stop Nut (I)
is screwed on well.
Note: The front hole of the Fan Blades (H) is larger than the
back hole.
Affix the Star Platform (D) on top of the Windmill Legs (A),
and tighten with Screws (J).
Place the Windmill Head (G, H, I) on the Needle (F). Secure the
windmill by inserting the Ground Stakes (O) through each hole
at the base of each Legs.
Assembling
D
E
F
O
O
O
C
K L L M N
K L L M N
J
A
A1
A2
J
B
PARTS AND HARDWARE LIST
A1 (TOP) = 3PC
A2 (BOTTOM) = 3PC
B = 1PC
E = 1PC
G = 1PC Rudder
H = 1PC Fan Blades
I = 1PC Stop Nut
M4 X 0.4”
M6 X 1.6”
J = 6PC
M = 6PC
K = 6PC
N = 6PC
O = 3PC
L = 12PC
D = 1PC
C = 3PC
F = 1PC
Windmill Legs
FDL Platform
Windmill Head
Screws
Top Mount Platform
Directional Cap
Side Panels
Needle (Screw into E)
Ground Stakes
I
G
H
A
D
E
J
K
L
M
G
H
I
N
O
F
B
C
Tools Required for Assembly:
#2 Phillips screwdriver
10” Adjustable wrench
Congratulations
on your assembly!
IMPORTANT: READ CAREFULLY BEFORE BEGINNING!
Make sure that all parts and hardware are present
before assembly.
Assemble on an a non-marring and level surface
Do not completely tighten all nuts and bolts until
the bench is fully assembled.
