background image

TX 93605    SINGLE ROCKER WITH STAR

Assemble

Parts

ARM REST

LENGTH: 21.3” x 2pc

LENGTH: 28” x 2pc

LENGTH: 35.6” x 2pc

LENGTH: 22.5” x 1pc

ROCKER RUNNER

LOWER SUPPORT BEAM

x 1pc

SEAT PANEL

x 1pc

BACK PANEL

SCREW:  S04-4

x 2pc

x 4pc

NUT & BOLT:  N08-8

0.3” x 3.1”

BACK 

VERTICAL LOG

1

LENGTH: 25.6” x 2pc

FRONT VERTICAL LOG W/DOWELED

3

LENGTH: 28.3” x 2pc

DIAGONAL

LOG

2

4

5

B

NUT & BOLT:  N08-12

x 16pc

0.3” x 4.7”

A

C

7

6

8

STEP 1

:  Assembling the Rocker Arm Frame

Take one piece of the following parts with a letter

“R” behind each number: 1, 2, 3, 4, 5 

(”R” = RIGHT)

1:  Part 1 to part 4

2:  Part 2 to part 3

3:  Part 3 to part 1

4:  Part 4 to part 2

5:  Part 5 to part 2 and 3

Use indicated hardware, directed by diagram.

REPEAT steps 1 through 5 above using

parts labeled with a letter “L” (LEFT)

after the part number.

STEP 2:  

Assembling the Bottom Half

Take assembled SEAT PANEL (7) and one of the arm frames, keep the arm frame 

standing and attached the SEAT PANEL (7) to the inside of the arm frame, secure with

the indicated nuts and bolts.

Insert the other arm frame

on the other side and

secure loosely with

nuts and bolts.

Take the lower support

beam and secure

under the seat between

the arm frame with

nuts and bolts. 

STEP 3

:  Assembling the Upper Half

STEP 4

:  FINISH

Once the bottom half is finished,

take the BACK PANEL (8) and

place it gently on part 4 of the

arm frame.

Secure with indicated hardware

in the diagram.

A

8

A

Tighten all nuts, bolts,

and screws once

every part and 

assembled pieces

are in place.

Congratulations

on your assembly!

1. Do not tighten bolts until fully assembled.

2. Recessed holes to face outward.

3. Insert bolts with washer and secure with washer and nut.

4. Pre-checked side must always face downward or inward.

IMPORTANT: READ CAREFULLY BEFORE BEGINNING!

Durable log construction.

Exclusive Char-log   finish and design

Patent pending crack resistant design and process

Special Char-log   heat curing, preserving, finishing 

Process resists mildew, mold, and stains 

Varnished to preserve Char-log   finish

Recessed Hole

Pre-Checked

®

®

®

Отзывы: