3
Operation
3.1
Power On/Off, Reset, Charging
a
25013_001
b
a
Power on/off button
b
Battery LED indicator
Function
Description
Power on/off
Turn on:
Press and hold the power button until all LEDs
switch on. The device sounds a beep when ready for
use.
☞
The device starts booting after the LEDs
switch on. Once it is ready, the device
sounds a beep.
Turn off:
Press and hold the power button until all LEDs
switch off and the device sounds a long beep.
Charging
Use the standard charger and USB-C data cable to
charge. The battery LED indicator is red while char-
ging and green when charging is finished.
3.2
Setups for the FLX100 plus Smart Antenna
To attach the FLX100 plus smart antenna on the top of a pole, the pole mount
adapter is required - Art. 915867.
Follow these steps to connect the FLX100 plus smart antenna to the pole.
25014_001
2
1
1.
Use a slot screwdriver to fix the pole mount adapter with both
screws to the FLX100 plus smart antenna.
☞
Make sure to fix the pole mount adapter in the correct
orientation.
2.
Screw the pole clockwise into the pole mount adapter.
Description
Setup on a pole
16
Operation
