EN
12
PREPARATIONS
ATTACHING THE CARRY STRAP
▸
Thread the small loop of the carry strap through the strap lug
▸
Thread the strap through the small loop
▸
Pull tight
• The loop created should lie tightly around the strap lug.
Caution
• Check the correct attachment of the carry strap by pulling at it
with some force. The length of the carry strap must not change.
INSERTING/CHANGING THE BATTERY
A cylindrical 3 V lithium cell (type CR 2) is required for power
supply.
▸
Turn the lid over the battery compartment in anti-clockwise
direction
▸
Remove the lid
▸
Insert the battery with the plus contact fi rst
▸
Attach the lid
▸
Tighten the lid by turning it in clock-wise direction
BATTERY CHARGE LEVEL
The measured value and reticule display will fl ash when the battery
nears depletion. You will still have enough power for another 100
measurements – but with a gradually reducing range – after the
display initially begins fl ashing.
