Leica M10- P ASC 100 Edition Скачать руководство пользователя страница 79

Страница: 79 / 116

Picture mode

Notes

• Studio flash systems may have a very long flash firing duration. It

may therefore be advantageous to select a slower shutter speed

than 1⁄180 s when using such a system.

• The same applies for RF-controlled flash firing for so-called

"off-camera" flashes, because they may have a certain time delay

due to RF transmission.

• The settings and functions described in the following sections

only apply to settings and functions available in this camera and

in system-compatible flash units.

• An exposure compensation setting (see p. 69) on the camera

will only affect the measurement of ambient light. Additional

settings on the flash unit will be required if you want to simulta-

neously use compensation of the TTL flash exposure metering in

flash mode (parallel or opposed). (Exception: On the Leica SF 26,

corrections must be set on the camera via menu control.)

Please read the relevant instructions provided with the device for

more information about flash use and the various available flash

modes when using flash units that are not designed specifically for

this camera.

FLASH MODES

AUTOMATIC (A)

▸

Switch on the flash unit

▸

Set the desired guide number control mode (e.g. TTL or GNC =

Guide Number Control) on the flash unit

▸

Switching the camera on

▸

Tap the shutter button before each flash exposure to activate

exposure metering

• The flash unit may not fire if this step is missed by pressing

the shutter button down completely and skipping these

settings.

▸

Set the desired exposure mode, shutter speed and/or aperture

setting

• Take note of the shortest flash sync speed, as it determines

whether a "normal" flash or an HSS flash is fired.

Содержание M10- P ASC 100 Edition





















































































































Результаты поиска

Содержание M10- P ASC 100 Edition

Отзывы:

Leica M10- P ASC 100 Edition, Инструкция по эксплуатации, Страница: 79 / 116

Результаты поиска

Содержание M10- P ASC 100 Edition

Отзывы: