background image

EN

72

Picture mode

LONG-TERM EXPOSURE (

B

)

In setting 

B

, the shutter remains open as long as the shutter button 

is held down (up to max. 4 min depending on the ISO setting).

This function can also be used to permanently set shutter speeds 

longer than 8 s:

 

Set the shutter speed setting wheel to 

B

 

Press the center button for approx 1 s

• The submenu containing the shutter speeds or 

B

 is shown in 

the display. Available shutter speeds are indicated in white 

(may vary depending on ISO sensitivity), those not available 

appear in gray.

 

Select the desired shutter speed

• Exit the submenu by tapping the shutter button, pressing the 

MENU

 button or the center button.

 

Shutter release

An additional T function is available in conjunction with the 

self-timer: The shutter will open after the preset delay automatical-

ly if 

B

 is set and the self-timer is also activated by tapping the 

shutter button. It will then remain open – without having to hold 

down the shutter button – until the shutter button is tapped again. 

This allows you to prevent any blurring for long exposures when the 

shutter button is pressed.

In each of these cases, the exposure meter remains deactivated; 

after shutter release, however, the digital number display in the 

viewfinder counts the elapsed exposure time in seconds.

Notes

• Long exposure times may cause severe image noise.

• After exposures with slower shutter speeds (from approx. 1⁄30 s, 

may differ depending on other menu settings), a data processing 

procedure will help reduce this annoying phenomenon. The 

process will take as long as the exposure. The doubling of the 

“exposure” time must be taken into account for long exposure 

times. The camera must not be switched off during that time.

• At shutter speeds from 2 s, the message 

Noise reduction 12s 

1

 

appears in the display.

1

 Time display is an example.

Содержание M10- P ASC 100 Edition





















































































































Отзывы: