Leica M 10, Инструкция по эксплуатации

Страница: 197 / 229

EN
193
Additional functions
RESETTING ALL CUSTOM SETTINGS
This function allows you to delete previous custom settings in the
main and picture parameters menus at once, and reset them to the
factory default settings.
Setting the function
1. Select the menu item
Reset Camera
,
2. in the query sub-menu confirm or reject the process, and
3. press the Center button
30
.
Notes:
• This reset also affects any individual profiles set and saved with
the
User Profiles
function.
• If the camera is not switched off, however, this does not apply to
settings under
Date & Time
. After the camera is switched on and
off, however, there is a new start, i.e. these settings must then
be made again �
FORMATTING THE MEMORY CARD
It is not normally necessary to format memory cards that have
already been used. However, if a card that has yet to be formatted
is inserted for the first time, it must be formatted.
Note:
You should get into the habit of copying all your pictures onto a
secure bulk storage medium, e.g. the hard drive on your computer,
as soon as possible. This is particularly important if the camera is
being sent for servicing along with the memory card.
Procedure
1. Select the menu item
Format SD
,
2. confirm or reject the process in the query sub-menu, and
3. press the Center button
30
.
Notes:
• Do not turn the camera off while a memory card is being format-
ted.
• If the memory card has been formatted in another device, such
as a computer, you should reformat it in the camera.
• If the memory card cannot be formatted/overwritten, you
should ask your dealer or the Leica Product Support department
(for address, see p. 224) for advice.