Leica M 10, Инструкция по эксплуатации

Страница: 169 / 229

EN
165
Pictur
e mode
With the monitor image in Live View mode
In Live View mode you can set the sharpness using the monitor
image, as it displays the subject with exactly the same sharpness
as is produced by the lens depending on the range and aperture
setting.
This applies to all lenses used, i.e. also with Leica R lenses.
Note:
Due to the different sensitivities and function conditions, there may
be differences between the optimum settings and those displayed.
Procedure
1. Switch on Live View mode by pressing the
LV
button
24
.
2. Use the focusing ring on the lens to focus on the desired sub-
ject details.
Features for manual focusing in Live View mode
To make it easier to achieve precise settings or it increase the
precision of a setting, two display variants are available.
– Enlarging an (initially) central detail of the monitor image.
– Identifying sharp subject parts in the monitor image.
Both variants can be used together.
Enlarging a detail
You can call up this function in three ways.
For occasional use:
Using the Focus button:
1. Select the menu item
Capture Assistants
,
2. in the sub-menu
Focus Aid
, and
3. the function
Manual
there.
4. Press the Focus button
3
.
For continuous use
Using the focusing ring on the lens:
1. Select the menu item
Capture Assistants
,
2. in the sub-menu
Focus Aid
, and
3. the function
Automatic
there.
4. Turn the focusing ring on the lens
16
.
Using the thumbwheel of the camera:
1. Select the menu item
Customize Control
,
2. in the sub-menu
Customize Wheel
, and
3. in the respective sub-menu
LV Zoom
.
4. Turn the thumbwheel of the camera
28
.
• As soon as the focus button is pressed or the ring or thumb-
wheel turned, the monitor image shows:
– the enlarged detail
– on the bottom left with a rectangle within a frame, the
approximate position of the detail