background image

5: Getting started 

Configure a RINEX logging session step-by-step 

This section explains how to configure a continuous RINEX logging session. 

Step

 

Description

 

1

 

Access the web interface.

 

2

 

Go to page 

GNSS management / Logging sessions

.

 

3

 

Use the button Create a new logging session 

.

 

4

 

The logging session wizard will start.

 

5

 

On the first page of the wizard enter a session name and choose 

RINEX

 in list box 

Data 

type

. Select a session priority and choose 

continuous

 in list box 

Session type

. Then 

use the 

Continue 

button.

 

6

 

On the next page choose a logging rate, the length of the logged file, the dynamics of the 
session and activate the check box if Doppler observations should be logged. Then use 

the 

Continue

 

button.

 

7

 

On the following page you can choose if the logged files should be zipped, you can 
select a directory naming convention, choose an FTP location where the files should be 
sent to and set an interval after which the files should be deleted from the memory 
device.

 

 

Note that you have to set up an FTP location on page 

GNSS management / FTP 

location

 before you can choose it in the respective list box.T hen use the 

Continue

 

button.

 

8

 

On the last page of the wizard you can activate the logging session. In this case the 
logging will immediately start. If you do not activate the check box 

Activate session

 the 

session will be saved with all its settings but it will not be started. Press the 

Save 

changes 

button to save all settings.

 

 

Configure a data stream step-by-step 

This section explains how to configure a new outgoing real time data stream using a radio. 

Step

 

Description

 

1

 

Access the web interface.

 

2

 

Go to page 

GNSS management / Data streams

.

 

3

 

 Use the button 

Create a new data stream

 

.

 

4

 

The outgoing data stream wizard will start.

 

5

 

Select 

Real time

 in list box 

Data stream type

. Press 

Continue

 

.

 

6

 

On the next page select a message format, version and message types (if available). Here 
you can also configure a reference station ID, the end of message settings, enable time 

slicing and choose the message rates. When finished press the 

Continue

 

button.

 

7

 

On the following page you can choose the type of data transmission, e.g. TCP/IP, modem or 

radio. Select 

Radio

 and press 

Continue 

.

 

8

 

The next page allows selecting a specific radio from the list of configured radio devices. 

Besides this, the radio channel can defined. When finished press the 

Continue 

button.

 

9

 

On the last page of the wizard you can activate the stream or just save the settings without 

staring the new stream. Press the 

Save changes

 

button to save all settings.

 

 

65 

Содержание GR10






























































































































































































































































































































Отзывы: