Leica GR10, Руководство по эксплуатации

Страница: 212 / 317

6: Context sensitive help
Support: Properties
Background information
Activate the automatic sending of dump files to Network Reference Stations support every time the receiver stops
operating.
The FTP push to Leica NRS support only works if there is an active connection to the internet. If
the internet connection is down, and the FTP push fails, then the dump files can be found in the
Transfer / Settings
folder on the SD card.
Setting Descriptions
The table below describes the settings that can be configured on the Properties page.
Support tool Description
Automatic mode
Select to activate Automatic mode.
If activated and the receiver has a problem while operating, it will automatically
retrieve the necessary information and send it via FTP push to NRS support.
Please note that no email is sent to NRS support. The pushed files
are checked by the NRS team on a regular basis.
Operator,
Company, Country,
Email
Enter the details in each field and press . The information will be transferred to
the
Support: Support tool
page. If the automatic mode is not activated then these
fields must be filled in.
Leica support
access Description
Enable Leica
support access
Activate to allow a Leica Support employee access to the receiver's web interface.
Binary data logging Description
Enable binary data
logging
Activate to enable LB2 binary data logging.
After a receiver reboot, this setting will be disabled.
Related topics
Support: Support tool
Directory Structure of the Memory Device
211