Leica GR10, Руководство по эксплуатации

Страница: 146 / 317

6: Context sensitive help
GNSS management: New / Edit FTP location
Background Information
Enter the necessary access information for pushing logged data from the GR receivers SD card to an external FTP
server.
Setting Descriptions
The table below describes the fields in the New / Edit FTP location page.
Setting Description
Name
Enter a unique FTP location name.
The maximum number of characters is 60.
FTP server host
Enter the server name or IP-address of the FTP server.
The maximum number of characters if 250.
FTP server port
Enter the TCP/IP server port of the FTP server.
The default value is 21.
FTP root directory
Enter an optional FTP root directory. This field can be left blank.
If entered, this directory has to exist on the FTP server. It will not be created
automatically during the FTP push.
Username
Enter a valid username to access the FTP sever account.
Password
Enter the password of the FTP sever account.
Send commands
Add a custom FTP protocol command which is executed directly after login. This field
can be left blank.
Use passive mode
Activate or deactivate using the passive mode.
Using the passive mode is recommended as it improves communication robustness.
Test FTP location
Press to test read and write access to the FTP location. Depending on the FTP server
setup, this test may take several minutes. Check the event log for results.
FTP retry:
If the receiver is not able to FTP push a data file to the remote FTP server at the scheduled time, this file will be listed
in the FTP push queue for this FTP location and a message will be displayed in the event log.
The receiver will then try at periodic intervals to push all files that have not yet been pushed successfully (new and
queued).
If the FTP push was successful, a message is displayed in the event log and the FTP push queue number is
updated.
145