Leica GR10, Руководство по эксплуатации

Страница: 125 / 317

Printed Documentation
Incoming data stream wizard: Configure Tilt
Background Information
Tilt devices (such as the Leica NIVEL210) are used for measuring inclinations. The data from the tilt device is logged
together with the GPS raw observations into MDB files. When logging RINEX files, the tilt data is written into a
special auxiliary file.
No tilt data is logged unless a logging session is configured in GNSS management: Logging
sessions and the incoming data stream is active.
Setting Descriptions
The settings on this screen define the input port and parameters for incoming tilt device measurements.
Setting Description
Device
Select the device. The Leica NIVEL210 is the only tilt device supported by the GR
receiver.
Data rate
Select the rate at which data is requested from the tilt device.
The following default settings are used for communication between the Tilt device and receiver.
NIVEL210 default communication settings
Communication
setting Default setting
Port name
Seria l Port (P1).
Baud rate
9600
Parity
None
Data bits
8
Stop bit
1
Flow control
No handshake. The handshake used between the receiver and the tilt device.
Press to go back to the previous wizard step. Press to continue to the next wizard step.
Press to cancel and return to GNSS management: Incoming data streams .
124