Leica Captivate, Техническое справочное руководство

Страница: 62 / 1060

Metadata Description
Source The data storage device where the job is stored.
Date cre-
ated
The date of when the job was created.
The panel is similar to the panel that opens when View & edit data was
selected from the job menu. Refer to "7.2 Accessing Data Management" for a
description of the panel.
The differences are:
• All changes done in the data set are applied to the original jobs.
• For the key New : To create a point/line. New points/lines are stored in the
main job and then displayed in the data set.
• For the metadata, Source is displayed. The linked job to which the point
belongs.
• On the 3D viewer page, the points and lines from the linked jobs are dis-
played. Selected filters for the data set points are applied.
The Dataset panel can also be accesses by a hot key or a favourites keys.
6.3 Choosing a Job
Select Leica Captivate - Home : Tap here to choose design data .
The pages that are always shown are: Points & lines and DTM .
The pages, Road , Rail and Tunnel are only shown if the appropriate app is
loaded.
☞ The design data selected in this panel, are global design data. In the
3D viewer and when using the apps. the global design data will be
overwritten by linked design data from the working job.
Key Description
OK To accept the selected job.
Page To change to another page on this panel.
Fn Settings To activate or deactivate job selection at the beginning of an
app.
Dataset
Access
Design Data
62 Job Menu - Jobs