Leica Geosystems Sprinter 150, Руководство пользователя

Страница: 22 / 378

19
Operation Messages Sprinter 150/150M/250M - 1.0.0en
EN
DE
FR
ES
NO
SV
FI
DA
IT
PT
NL
10. Operation Messages
E114 Invalid Measurement ! Make another measurement. If further measurement proved to be futile, check staff position and Inverse
Staff setting, check the lighting condition at the staff and stray light, check focusing and targeting, check
if sufficient length of barcode in the field of view.
E115 Temperature Sensor
Error !
Cover the objective telescope with a hand and switch ON the instrument. Hardware communication failed.
E116 Adjustment Error ! Carry out the adjustment with guided steps, make sure instrument is level and staff is truly vertical in
normal position. Collimation is out of correction range.
E117 BM Change Not Allowed! Exit to default measurement mode by pressing HEIGHT/DISTANCE key, and change the Benchmark
elevation in the INPUT BM menu mode.
E119 Staff Blocked Not enough barcode length for measurement.
E120 Image sensor Error! Contact services.
E121 Adjustment Inverse Staff
Not Allowed!
Check the staff orientation and staff setting.
E123 PtID Change Not Allowed Exit the message by pressing ESC key.
No. Error message Counter measure / causes
Operation message Counter measure / remark
Start Tracking! Tracking mode starts.
Stop Tracking! Tracking mode stops.
Tracking Hold! Press measure key for 3 seconds to restart tracking mode. Tracking will hold after 10 unsuccessful meas-
urements.
Abort Measurement! Current measuring process is terminated.
Downloading Data! Downloading of data from the internal memory to an external device is in progress.