manualshive.com logo in svg

Leica Geosystems DD120 Series, Руководство пользователя

Поделиться
Скачать
Leica Geosystems DD120 Series Скачать руководство пользователя страница 55

The purpose of the following procedure is to verify the performance of the

transmitter.

☞

Conduct the test away from areas of electromagnetic interference or

over buried utilities with a large signal radiating off them.

1.

Plug the transmitters cable set into the connection socket.

2.

Connect the black and red cable clips together, ensuring good metal

to metal contact.

3.

Press and hold the Frequency key and turn on the transmitter.

Keep holding the Frequency key until the test starts.

4.

Observe the displayed output during the performance check:

Induction Mode Test: 

The Frequency LED indicators light up one

after the other, showing the frequency on test.

Connection Mode Test:

 The Connection Mode LED indicator lights

up. The Frequency LED indicators light up, showing the frequencies

on test. The Connection Mode LED indicator turns off.

5.

After the performance check, the transmitter displays the result:

Test successful: 

A high-low pulsed tone is emitted three times. If

the test was done with low batteries, the Low Battery LED indicator

illuminates.

Test failed:

 A low-pitched tone is emitted. If the test was done with

low batteries, the Low Battery LED indicator illuminates.

•

If the Induction Mode failed: The respective Frequency LED indi-

cator lights up.

•

If the Connection Mode failed: The Connection Mode LED indica-

tor and the respective Frequency LED indicator light up.

☞

If the performance check fails, ensure that the cable set of the

transmitter is fully engaged and the clips are connected.

☞

If the performance check fails, the transmitter automatically repeats

it. Repeated failure indicates a faulty unit. Return the transmitter for

service.

☞

The Signal Transmitters firmware can be updated to the latest stand-

ard using DX Office Shield. It is important that DX Office Shield is

installed on a PC with Internet access.

For additional information refer to https://leica-geosystems.com.

9.4

Functional Check of the Trace Rod

The purpose of the following procedure is to verify the performance of the

trace rod.

☞

For this procedure, the following system components are required:

•

A transmitter for generating the signal in the Sonde and Line

mode tests.

•

The cable set for the transmitter.

1.

Plug the transmitters cable set into the connection socket.

2.

Connect the red cable to the positive (+) terminal on the trace rod

and the black cable to the negative (-) terminal.

3.

Turn on the transmitter.

4.

Use the Power Output key on the transmitter to adjust the power

output to minimum.

The transmitter should emit a constant tone.

Checking the

performance

Checking the

performance

Functional Checks

55

Содержание DD120 Series





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды