manualshive.com logo in svg

Leica Geosystems BLK3D, Руководство пользователя

Поделиться
Скачать
Leica Geosystems BLK3D Скачать руководство пользователя страница 20

6.

Multi-Shot is required for 3D measurements and 3D Images

which should be used for 3D modelling. To increase the

accuracy, take up to four shots.

 

The recommended baseline length between two shots is 10% of the distance

from the imager to the object.

Example:

If the target is 5 m/16.4 ft away from the imager, use a baseline of 0.5 m/

1.6 ft between the first and the second shot. Use the same distance between

the second and third, as well as the third and fourth shot.

D - Distance

B - Baseline

Tip:

 The recommended distance between two shots is displayed on-screen

while capturing. To display the recommendation, activate 

Laser assisted cap-

ture

.

Single-shot

Single-shot is recommended for distances up to 2.5 m/8.2 ft between the

imager and the target.

Recommended

baseline length

Recommended num-

ber of shots

20

Measurement Principle

Содержание BLK3D







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды