Leica BIOSYSTEMS HistoCore BIOCUT Скачать руководство пользователя страница 12

Страница: 12 / 90

Version 1.7, Revision K

Safety

Warning

Knife/blade holder falling off the instrument.

Serious injury of persons and/or property damage.

• If the knife/blade holder is not fixed, for example, during installation or cleaning, pay special

attention that the blade holder is not falling off.

• Whenever possible, fix the knife/blade holder to avoid falling off.

Warning

Section waste tray falling down after it has been detached.

Injury of persons.

• Work especially carefully when detaching the section waste tray and put it in a safe place.

Warning

Oil is spilled and not cleaned-up immediately.

Serious injury of persons, for example, by slipping and getting in contact with dangerous parts like

the knife/blade of the instrument.

• Always make sure that no oil is spilled.

• If oil has been spilled, clean it up immediately, thoroughly and completely.

Warning

Paraffin waste falls on the floor and is not cleaned-up.

Serious injury of persons, for example, by slipping and stumbling into the knife/blade.

• Always clean up paraffin waste before it spreads, becomes slippery, and becomes a hazard.

• Wear appropriate shoes.

Caution

Accessories/components loosening/damaged during transportation.

Property damage or delayed diagnosis.

• The packaging has the ShockDot Impact Indicator, that indicates improper transport. When the

instrument is delivered, check this first. If the indicator is triggered, the package was not handled

as prescribed. In this case, please mark the shipping documents accordingly and check the

shipment for damage.

2.2.3 Operating the instrument

Danger

Explosive hazard.

Death or Serious injury of persons, and/or property damage.

• Never operate the instrument in rooms with an explosive hazard.

Содержание HistoCore BIOCUT



























































































Результаты поиска

Содержание HistoCore BIOCUT

Отзывы:

Бренды по названию

Популярные бренды

Leica BIOSYSTEMS HistoCore BIOCUT, Инструкция по эксплуатации

Результаты поиска

Содержание HistoCore BIOCUT

Отзывы:

Бренды по названию

Популярные бренды