Leica BIOSYSTEMS 1404723512 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 42

Leica BIOSYSTEMS 1404723512 Скачать руководство пользователя страница 9

9

VT1000 S

Safety

2

2.

Safety

Warning

The safety and caution notes in this chapter must be observed at all times.
Be sure to read these notes even if you are already familiar with the operation and use of other Leica

products.

2.1

Safety notes

These Instructions for Use includes important information related to the operating safety and
maintenance of the instrument.

The Operating Manual is an important part of the product, and must be read carefully prior to startup
and use and must always be kept near the instrument.

This instrument has been built and tested in accordance with the safety requirements for electrical
equipment for measurement, control, and laboratory use.

To maintain this condition and ensure safe operation, the user must observe all notes and warnings
contained in these Instructions for Use.

The current EC Declarations of Conformity can be found on the Internet: www.LeicaBiosystems.com

Note

These Instructions for Use must be appropriately supplemented as required by the existing

regulations on accident prevention and environmental safety in the operator‘s country.

Warning

The protective devices located on the instrument and the accessories must not be removed or

modified. The instrument must only be opened and repaired by service technicians authorized by

Leica.

2.2

Warnings

The safety devices installed in this instrument by the manufacturer only constitute the basis for accident
prevention. Operating the instrument safely is, above all, the responsibility of the owner, as well as the
designated personnel who operate, service or clean the instrument.

To ensure trouble-free operation of the instrument, make sure to comply with the following instructions
and warnings.

«
...
7
8
9
10
11
...
»

Содержание 1404723512











































Отзывы:

Нет отзывов