Leibinger JET3, Руководство по эксплуатации

Страница: 296 / 406

Page 294 Job Editor Group 8
Release 2.02 JET3 Series
IMPORTANT
Due to integrated counters and replacements impermissible number of
digits or invalid constellations can be caused. These barcodes are
displayed as crossed out codes in the job editor and the preview.
Correct EAN13 code with 13 numbers
EAN13 code with only 5 numbers. Recognized
as wrong code and crossed out.
8.7.1.4.1 Bar code settings: Bar code format
Please see Figure 162
To open the dialog box
(3) with the format options for the bar code type selected push
the <Barcode Format> button (2) on the <Barcode settings > tab (1) .
1-D bar codes can either have a 2-width-symbology or a many-width-symbology
(Symbology: rules about how bars and spaces are structured).
A bar code with a 2-width-symbology uses only two widths for bars and spaces: wide
and narrow. The width and spaces of barcodes with a many-width-symbology are all
multiples of a basic width called the
module ; most such codes use four widths of 1, 2, 3
and 4 modules .
Within the
<Barcode format> dialog box the bars (4) and spaces (5) are called Elements
(Elem.) . The elements are defined by the number strokes per bar or per space. A stroke
is one vertical print movement.
The width of a bar or a space is
defined by the number of strokes. For
bar codes with a 2-width-symbology
only the element 1 and element 2 will
be used for the bar code. Settings for
element 3 and 4 will be ignored for
that kind of bar code.