Leibinger JET3 up, Руководство по эксплуатации

Страница: 330 / 412

Page 328 Job Editor Group 8
Release R1.06 JET3up
8.7.4.2 Set up shift times and integrate shift codes in print outs
Example:
A shift code should be written additionally to an existing fix text „xxx“.
In the first shift (early shift) at 6.15 am „xxx
001 “.
In the second shift (late shift) at 12.15 pm „xxx 002 “.
In the third shift (night shift) at 20.15 am „xxx
003
“.
Proceeding:

Press the button <Insert> (1) and the option <Shift Code> (2) or the
accordant direct button [icon] (3) .

The dialog box <Object settings (Shift Code)> is faded in.
On the tab
<Global Settings> (4)
carry out the requested settings for the font
parameters and display options. You will find further information in the chapter
8.4 Object settings

Now change to the tab <Shift Code> (5) . The selection of the tab happens by
clicking on the tab bar.

Now mark in the setting field <Shift Times> (6) the hour- or minute block to
change the values. With the accordant <Arrow keys> (7) you can increase or
reduce the values of the marked block (9) .

Now click in the input field <Shiftcode> (8) . A keyboard field pops up for
input. Now enter „001“.

Press the button <Enter
↵
> (10) of the keyboard field. The entered characters
are taken over and are displayed in the setting field.
INFORMATION
You will find further information about the usage of the keyboard in
chapter
6.4.2 Keyboard

Now press the button <Add> (11) . The settings that have been made are
transferred to the list of shift codes (12) .