Leibinger JET3 up, Руководство по эксплуатации

Страница: 328 / 412

Page 326 Job Editor Group 8
Release R1.06 JET3up
8.7.3.1.13 Global counter
With the check box <Global counter> on the < Counter> tab selected the
counter object will be declared as <Global counter> . Within a print job only one
counter can be declared as <Global counter> . The counter reading is stored in a
special memory register and it is available in all print jobs.
Therefore it is possible to access the current counter reading from each print job
provided in that print job there is one counter declared as
<Global counter>
.
Example
With a <Global counter> it is possible to print consecutive numbers on different
products which are imprinted using different print jobs.
Basics rules about global counters
1. There can be declared only one counter as global counter within a print job
2. The counter reading can only be set or reset within the job editor. For this
the object has to be selected in the job editor in order to call the <Object
settings> dialog box.
3. A <Global counter> can be edited during <Print Start> mode (green
<Print Start> button is activated) but closing the dialog box will discard all
changes. Changes on the <Global counter> settings and counter reading
can only be saved during
<Print Stop>
mode (red
<Print Stop>
button is
activated).
8.7.3.2 Carry out replacements
On the tab <Replacements> of the dialog box you can generate accordant
replacements (numbers or letters) for the counter values to get an operating specific
display or coding of the specifications.
INFORMATION
You will find further information regarding the carrying out of
substitutions in the
chapter 8.8 Replacements