LEHNER Vento II, Инструкция по эксплуатации со списком запасных частей

Страница: 36 / 74

Operation
36 / 74 1.0 Vento
®
II
4.5.14 Blower
Advice
Setting a high blower power increases energy consumption.
Lateral distribution can be varied by means of the blower power.
To switch on blower:
1. Press blower button.
The blue status LED will flash.
The blower will accelerate to the last setting.
After reaching this setting, the blue status LED will
be lit.
To switch off blower:
1. Press and hold the blower key for 3 seconds.
The blower will switch off.
The orange status LED will be lit.
To set the blower:
1. Press the blower key whilst the blower is operating.
Blower
1
%
The current setting will be displayed.
2. Set the required value by turning the turn-and-push
button.
3. Confirm your selection by pressing the turn-and-
push button.
The entry will be confirmed.
The start menu will be displayed.