LEHNER Vento II, Инструкция по эксплуатации со списком запасных частей

Страница: 3 / 74

Declaration of conformity
Vento
®
II 1.0 3 / 74
1 Declaration of conformity
EC Declaration of Conformity
In accordance with the EC Machinery Directive 2006/42/EC, app. II, 1.A
Manufacturer:
LEHNER Agrar GmbH
Haeuslesaecker 5-9
89198 Westerstetten
Person resident in the Community who is entitled to assemble the relevant technical documents:
LEHNER Agrar GmbH
Haeuslesaecker 5-9
89198 Westerstetten
Description and identification of the machine:
Product: Vento®
Function:
Vento® is a pneumatic granulate dispenser for different kind of seeds and granulated fertilizer in agriculture.
The exact dosage is via a rotary valve, which is controlled speed dependent application rate. An automatic
dosing via wheel sensor or GPS receiver is also possible. The pneumatic spreader feature is an agitator for
heavy-flowing spread materials. The grit is discharged by airflow of 8 tubes. Vento® is manufactured in
different sizes.
It is expressly declared that the machine is in accordance with all relevant provisions of the following
EC Directives:
2006/42/EC EC Machinery Directive 2006/42/EC
2004/108/EC (Electromagnetic Compatibility) Directive 2004/108/EC of the European
Parliament and the Council dated 15 December 2004 on the harmonization of
legal regulations in the member states regarding electromagnetic
compatibility and replacing Directive 89/336/EEC
Source of the applied harmonized standard acc. to Article 7, para. 2:
EN ISO 12100-2:2003-11 Safety of Machinery – Basic concepts; general principles for design –
Part 2 Technical principles
EN ISO 14121-1:2007 Safety of Machinery – Risk assessment – Part 1: Principles
(ISO14121-1:2007)
EN 50498:2010 Electromagnetic compatibility - Product family standard for electronic
equipment installed subsequently in vehicles
EN ISO 14982:2009 Electromagnetic compatibility - Agricultural and forestry machinery
Source of the applied other technical standards and specifications:
EN ISO 12100-1:2003-11 Safety of Machinery – Basic concepts; general principles for design –
Part 1: Basic terminology, methodology
Westerstetten, 01.07.2015
Place, Date Signature
Helmut Lehner
Managing Director