Lehigh E-Flex EFRP-04 Скачать руководство пользователя

Страница: 30 / 43

E-Flex User Manual, Rev. 1.30

Set Timeclock Contact Closure Mode

Press

Enter

at the tcci menu, the

Polarity

list control is displayed.

Press the

button to scroll to the

options

list control.

Press

Enter

for options list. The current programmed option will be displayed first.

Use the

and

Down

buttons to display the available options:

Opt1

– momentary, turn off assigned zones.

Opt2

- maintained, start/stop LightsOut on closure/open.

Opt3

- maintained, closure turns on assigned zones to preset, open to off. (default)

*Opt4

– maintained, closure turns on assigned zones to panic preset, open return to normal (fire alarm).

Opt5

- maintained, closure turns on demand response and load shedding, open return to normal.

Press

Sel

to choose the displayed option. The apostrophe LED will be lit for the current programmed

option. Press

Store button

to record the new setting.

*preset 19 is dedicated to panic preset for time clock, use preset editor to set levels as desired.

Assign Zones to Timeclock Contact Closure Input

Press

Enter

at the tcci menu, the

Polarity

list control is displayed.

Press the

button twice to scroll to the

zone

list control.

Press

Enter

to show the first item in the zone list.

Use the

and

Down

buttons to scroll thru the list of zones:

Zon1-4

– 4 circuit panel

Zon1-8

– 8 circuit panel

Press

Sel

to assign or un-assign the displayed zone. The apostrophe LED will be lit for each assigned

zone. Press

Store

button to record the new zone assignments.

Set Timeclock Response Preset

Press

Enter

at the tcci menu, the

Polarity list control

is displayed.

Press the

Down

button twice to scroll to the

tcci

preset

entry control.

Press

Enter.

The current TCCI preset will be displayed.

Use the

and

Down

buttons to set the occupied preset, 1-16, or OFF**. The

default is preset 1.

Press

Store

button to record the new setting.

**OFF preset is only available for mode option 4. This is not used in demand response mode.

Содержание E-Flex EFRP-04












































Результаты поиска

Содержание E-Flex EFRP-04

Отзывы:

Похожие инструкции для E-Flex EFRP-04

Бренды по названию

Популярные бренды

Lehigh E-Flex EFRP-04, Инструкция по установке и эксплуатации

Результаты поиска

Содержание E-Flex EFRP-04

Отзывы:

Похожие инструкции для E-Flex EFRP-04

Бренды по названию

Популярные бренды