33
_________________________________________________________________________________
Tyre pressure:
23*10.50-12 grass profile 3.0 bar (43 PSI)
23*10.50-12 TR profile
3.0 bar (43 PSI)
Leguan TeHo trailer
6.0 bar (87 PSI)
Do not exceed maximum inflation pressures marked on the tyres.
Wear pads on the telescopic boom must be checked every 5 years max.
Tightening torque of the M16 fastening bolts of the slewing ring is 210 Nm
– torque must be
checked once a year and bolts must be changed every 5 years.
Above mentioned service intervals are recommendations. If the operating conditions are very
hard and/or the machine is in heavy duty use the service and change intervals must be
shortened.
15.2 Greasing of the machine
Greasing of the machine is of utmost importance in order to prevent wear in joints. Most of
the joints are service free - however the slewing ring must be greased in accordance with the
maintenance schedule, using grease that contains EP (extreme pressure) additive. Outrigger
bearings and articulation bearings in all hydraulic cylinders must be greased in accordance
with the maintenance schedule.
Greasing of the Slewing Ring
The lift
’s Slewing Ring must be greased monthly, according to the maintenance schedule. It
is important to notice that the Slewing Ring has five (5) separate greasing points (Picture 12)
which all must be greased individually. The grease nipples on the outside of the Slewing Ring
are connected to the gear and
it’s bearings. Two (2) grease nipples on the inside of the
Slewing Ring are connected to the Ring’s ball bearings. Easiest way to apply grease on
these two grease nipples is through the cleaning hatch on the bottom of the chassis.
Picture 12. Slewing Ring’s greasing points. The ring pictured from above.
