Leguan 135 NEO, Руководство оператора и по обслуживанию

Страница: 20 / 66

20
Lower controls panel
Figure 8 Lower controls panel
1. Hour meter
2. Safety functions override switch
3. Emergency stop switch
4. Indicator lights
-
Inclination sensor
-
Platform overload
-
Dynamic outreach control
5. Remote control selection switch
6. Combustion engine / electric
motor start switch
7. Ignition key / upper/lower
controls selector switch
8. Boom raise switch / choke
9. Telescope in/out switch
10. Boom rotation switch
11. Platform tilt switch
12. Home switch / lowering
13. Speed selector switch (dead
man’s switch)
Functioning of the lower control:
1. The ignition key (figure 8, switch 7) must be turned to lower control position
2. Turn on combustion engine or electric motor with the start switch (figure 8, switch 6)
3. To use the booms (figure 8, switches 8-11), you must also select movement speed with the
speed selector switch (switch 13).
-
The speed selector also works as a dead man’s switch, so it must be kept turned to the
desired speed ( or ) when using the booms.
When the work takes place in an area that is open to the public, the ignition key should be
removed to prevent unauthorised use and the machine can only be used from the platform.
NOTE! The emergency stop buttons of the lower control and platform
panels function regardless of which control mode is selected.