2
Connecting to a Network or Room
Select the connection appropriate to the project you are working on. Select “Network”, then select the
Adapter
that provides the
connection to that network.
Double-click here
to refresh the list
of all the currently
available ways to
connect to the DLM
system
For applications with multiple rooms networked together using BACnet, the available BACnet networks will show up in the list. The
“Remote Connection” value allows you to remotely connect to a network controller via an Internet connection for remote discovery, read,
and send commands.
Logging in to Your Account or Requesting an Account
1. To log in to your account, click
Menu
in the Account section of the ribbon and select Log In.
2. Enter your User Name and Password. Once logged in, the “lock” in the Account icon will change from red to green.
NOTE:
You must be connected to the Internet the first time you log in to your account on a specific PC. This will download the needed
security certificates that will be used with the site. Once this is done, it is possible to log in while off-line, create sites, and then
upload them to the cloud at a later point. If you log in on a different PC at a later time, you will once again need to be initially
connected to the Internet.
If you do not already have an account, you can request one from within LMCS (you must be connected to the INTERNET). Note that it is
also possible to request an account through the DLM Config App for mobile devices.
1. Select “Request Account” from the menu to open the
Register
dialog.
Register Dialog
2. Enter information in all fields. Passwords must follow these rules: at least 8 characters long, containing at least one capital letter
and one number.
