Tynetec, a business unit of Legrand Electric Ltd
Cowley Road, Blyth Riverside Business Park, Blyth, Northumberland, NE24 5TF.
Tel: +44 (0) 1670 352371 www.tynetec.co.uk
Trusted Technology
Caring for People
869MHz Client Wandering
Door Alarm
Caring for People
_________________________________________________________________________
________________________________________________________________
Doc No. FM0877 V1.02 Page 1
•
Fixed trigger device
•
Used to support the care of dementia patients
•
Compatible with Reach IP, Advent XT2 & Carer Response
•
Transmitter with internal reed switch
•
Surface magnetic door contact
•
5 Year Lithium battery (typical)
•
Low battery warning
•
Operating Temperature: +5
o
C to +40
o
C
•
Telecare Transceiver: 869.2125MHz Class 1.5
•
Digital Heartbeat
•
Weight: 49 grams
•
Dimensions: 80mm x 40mm x 20mm (HxWxD)
•
Product Code: ZXT833
The client wandering door alarm can be used to raise a
wandering alarm if a resident leaves their room/home
during a pre-set time period each day.
The Reach IP or Advent XT2 system must be setup with an
active time span (i.e. start time and end time) when the
wandering alarm door contact will be active.
Note: it is not possible to set an active time span on the
Carer Response therefore an alarm will be reported
whenever the door is opened.
Positioning
The magnet will usually be screw fixed to the door with the
transmitter unit fixed alongside as close as possible on the
door frame using the self-adhesive foam pad.
These parts can be reversed if it is more convenient to fit.
The distance between the transmitter unit and the magnet
must not exceed 10mm when the door is closed. If the
door is made from metal the magnet may need to be
closer.
Alarm Condition
If the monitored door is opened during the pre-set alarm
period a client wandering alarm call will be transmitted.
A new alarm will not be triggered until the door has been
closed and opened again.
Low Battery Condition
A low battery condition will be reported automatically to the
Alarm Receiving Centre (ARC) or the local Manager. The
batteries should be replaced as soon as possible within 30
days.
Out of Range Notification (Reach IP)
The Reach IP can monitor all radio peripheral devices to
determine whether they have been damaged or removed
from an installation. Should the Reach IP be unable to detect
a device’s heartbeat it will automatically generate a “radio
out of range” notification. Firstly, investigate if there’s a
genuine reason for the alert, if not, arrange for the
peripheral device to be replaced immediately.
The “Radio out of range
timer” can be set from 30 hours to
99999 hours in Pulse CMP. “Radio supervision” can be
disabled by unchecking the tick box associated with each
peripheral device in Pulse CMP.
Maintenance
Test the door alarm once every month.
Clean with a damp cloth, do not use solvents or cleaners on
the door alarm.
Disposal
Waste electrical products should not be disposed
of with normal household waste. The door alarm is
ideally suited for disposal within the waste
electronic and electrical equipment (WEEE)
recycling scheme. Please recycle where facilities exist.
Check with your local authority or contact your supplier for
recycling/disposal advice.
Warning
The door alarm contains a Lithium battery. If tampered with
the battery may be damaged and create a fire hazard.
No attempt should be made to remove or replace the
battery. Do not incinerate.