LEGRAND Raritan SRC-0100, Руководство пользователя

Страница: 527 / 698

Chapter 8: Using the Command Line Interface
515
Setting an LED Color for a Rack Unit
This command syntax sets the LED color for a specific rack unit on the
specified asset strip. You need to set a rack unit's LED color only when
the LED operation mode of this rack unit has been set to "manual."
config:# rackUnit <n> <rack_unit> LEDColor <color>
Variables:

<n> is the number of the FEATURE port where the selected asset
strip is physically connected. For the SRC device with only one
FEATURE port, the number is always 1.

<rack_unit> is the index number of the desired rack unit. The index
number is available on the asset strip or the Asset Strip page of the
web interface.

<color> is the hexadecimal RGB value of a color in HTML format. The
<color> variable ranges from #000000 to #FFFFFF.
Note: A rack unit's LED color setting overrides the global LED color
setting on it. See
Setting LED Colors for Connected Tags (on page 511)
and
Setting LED Colors for Disconnected Tags
(on page 512).
Setting an LED Mode for a Rack Unit
This command syntax sets the LED mode for a specific rack unit on the
specified asset strip. You need to set a rack unit's LED mode only when
the LED operation mode of this rack unit has been set to "manual."
config:# rackUnit <n> <rack_unit> LEDMode <mode>
Variables:

<n> is the number of the FEATURE port where the selected asset
strip is physically connected. For the SRC device with only one
FEATURE port, the number is always 1.

<rack_unit> is the index number of the desired rack unit. The index
number is available on the asset strip or the Asset Strip page of the
web interface.

<mode> is one of the LED modes:
on, off, blinkSlow or blinkFast.
Mode Description
on This mode has the LED stay lit permanently.
off This mode has the LED stay off permanently.