manualshive.com logo in svg

LEGRAND Raritan SRC-0100, Руководство пользователя, Страница: 347 / 698

Поделиться
Скачать
LEGRAND Raritan SRC-0100 Скачать руководство пользователя страница 347

 

Chapter 6: Using the Web Interface 

 

 

335

 
 

4.

 

Click Download Bulk Configuration. 

5.

 

When prompted to open or save the configuration file, click Save. 

 

Step 3: Perform bulk configuration 

You must have the Administrator Privileges to upload the 
configuration. 

1.

 

Log in to the target SRC, which is of the same model and runs the 
same firmware as the source SRC. 

2.

 

Choose Maintenance > Bulk Configuration. 

3.

 

Click  

  to select the configuration file. 

4.

 

Click 'Upload & Restore Bulk Configuration' to copy it. 

5.

 

A message appears, prompting you to confirm the operation and 
enter the admin password.   

Enter the admin password, and click Restore. 

6.

 

Wait until the SRC resets and the login page re-appears. 

 

Alternatives: 

To use a different bulk configuration method, refer to: 

 

Bulk Configuration via SCP

 (on page 527) 

 

Bulk Configuration or Firmware Upgrade via DHCP/TFTP

 (on 

page 554) 

 

Configuration or Firmware Upgrade with a USB Drive

 (on page 

539) 

 

Raw Configuration Upload and Download

 (on page 577) 

Tip: Both methods of uploading 'bulk configuration' file or 'raw 
configuration' file via SCP can serve the purpose of bulk configuration. 
The only difference is that you can configure device-specific settings with 
the upload of raw configuration but not with the 'bulk configuration' file. 

 

Modifying or Removing Bulk Profiles 

You can modify or remove any bulk profile except for the built-in one. 

Note that a profile that has been set as the default cannot be removed, 
either. To remove it, you have to remove its default setting first. 

Choose Maintenance > Bulk Configuration. A list of profiles displays and 
then do one of the following. 

 

To modify an existing profile: 

1.

 

Click on the row of the wanted profile in the list. 

Содержание Raritan SRC-0100



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов