LEGRAND Raritan PX3TS, Руководство пользователя

Страница: 414 / 911

Chapter 7: Using the Web Interface
394
Available Actions
The PX3TS comes with three built-in actions, which cannot be deleted. You can
create additional actions for responding to different events.
To test an action:
•
Click the Test button next to the Action. The action is triggered and you
can verify it.
Built-in actions:
•
System Event Log Action:
This action records the selected event in the internal log when the event
occurs.
•
System SNMP Notification Action:
This action sends SNMP notifications to one or multiple IP addresses after
the selected event occurs.
Note: No IP addresses are specified for this notification action by default so
you must enter IP addresses before applying this action to any event rule.
See
Editing or Deleting a Rule/Action (on page 429). Any changes made to
the 'SNMP Notifications' section on the SNMP page will update the settings
of the System SNMP Notification Action, and vice versa. See
Configuring
SNMP Settings (on page 340).
•
System Tamper Alarm:
This action causes the PX3TS to show the alarm for the Raritan tamper
sensor, if any, on the Dashboard page until a person acknowledges it. By
default, this action has been assigned to the built-in tamper detection
event rules. For information on acknowledging an alarm, see
Dashboard -
Alarms (on page 190).
Actions you can create:
1. Choose Device Settings > Event Rules > .
2. Click the Action field to select an action type from the list.
3. Below is the list of available actions.