LEGRAND Raritan PX3-3000 Series, Руководство пользователя, Страница: 432 / 977

Chapter 6: Using the Web Interface
411
Placeholder Definition
[USERIP] The IP address a user connected from
[USERNAME] The user who performed an operation
[VERSION] The firmware version the device is upgrading to
Note: In case you need to type any square brackets "[" and "]" in the
custom message for non-placeholder words, always add a backslash in
front of the square bracket. That is, \[ or \]. Otherwise, the message sent
will not display the square brackets.
Editing or Deleting a Rule/Action
You can change the settings of an event rule, action or scheduled action,
or delete them.
Exception: Some settings of the built-in event rules or actions are not
user-configurable. Besides, you cannot delete built-in rules and actions.
See
Built-in Rules and Rule Configuration
(on page 354) or
Available
Actions
(on page 375).
To edit or delete an event rule, action or scheduled action:
1. Choose Device Settings > Event Rules.
2. Click the desired one in the list of rules, actions or scheduled actions.
Its setup page opens.
3. Perform the desired action.

To modify settings, make necessary changes and then click Save.

To delete it, click on the top-right corner. Then
click Delete on the confirmation message.
Sample Event Rules
Sample PDU-Level Event Rule
In this example, we want the PX3 to record the firmware upgrade failure
in the internal log when it happens.
The event rule involves:

Event: Device > Firmware update failed

Action: System Event Log Action
To create this PDU-level event rule:
1. For an event at the PDU level, select "Device" in the Event field.