LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 81

Страница: 81 / 284

Appendix A: Port Scanner

The currently displayed port is highlighted in the thumbnails preview.

Click the thumbnail once to view the port in the scanner. Double-click the

thumbnail to open a KVM session to the port. Note that the default action

of a double-click can be configured in Launch Settings. See

Access Client

Settings

(on page 118)

Right-click a thumbnail to open a pop-up menu with more options:

•

Open in new KVM client: launch a KVM session to the port in a new

window.

•

Open in current KVM client: launch a KVM session to the port in the

currrent window.

•

Continue Scan with port "port name": Start scanning the selected port.

•

Remove from scanner: Turns off the "Include in Port Scanner" setting for

the port.

•

Temporarily Remove from Scanner: The port is removed from this scanner

session, but it is included the next time the scanner is started.

Scanner Options

The port scanner can be configured to set intervals and delays, thumbnail

orientation, and pause behavior.
See

Port Scanner Settings

(on page 72) to configure recording scanner

snapshots.

To set scanner options:

In the Main Menu, click Port Scanner to open the port scanning window.

Click the Scan Settings icon to open the options.

Configure intervals and delays:
a.

Port Display Interval: Select the number of seconds to display each

port before switching to next

Interval between Ports: Select the number of seconds to pause after

Port Display Interval ends.

Configure settings:
a.

Thumbnails orientation: Select Vertical or Horizontal to position

thumbnails in relation to scan window.

Use Grid View for Thumbnails: Select this checkbox to enable grid view.

See

Port Scanner Grid View

(on page 75).

Pause Scanner when opening KVM Sessions : Select this checkbox if

the scanning should stop when you open a port into a full KVM

session.

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

LEGRAND Raritan Dominion User Station, Руководство пользователя, Страница: 81 / 284

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы: