LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 33

Страница: 33 / 284

Appendix A: Getting Started

For additional settings, click the Ethernet tab. See

Ethernet Settings

(on

page 233).

Click OK. The new network settings apply now.

Logout or Shutdown

Both logout and shutdown commands are available under Leave in the Main

Menu.

•

Log Out

: Logs the user out of the User Station.

Shut Down

: Provides the following options. Click the one you prefer, or the

User Station will automatically shut down in one minute. For detailed

information, see

Screen Unlocking

(on page 247).

Restart

: Restarts the User Station.

Shut Down

: Powers off the User Station. You should always use the

software command as the only method to power off your User Station.

Warning: Do NOT turn the Dominion User Station off by holding down the

Power button or unplugging the power cord because such operations may

damage it. A short press of the Power button initiates a graceful shutdown

that does not save open sessions.

VESA Mount (Optional)

You can mount the Dominion User Station onto the back of a monitor with 75

or 100 mm VESA standards.

VESA mount procedure:

Turn OFF and disconnect all devices from the power sources, including the

monitor.

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

Похожие инструкции для Raritan Dominion User Station

Бренды по названию

Популярные бренды

LEGRAND Raritan Dominion User Station, Руководство пользователя

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

Похожие инструкции для Raritan Dominion User Station

Бренды по названию

Популярные бренды