LEGRAND Raritan Dominion User Station Скачать руководство пользователя страница 167

Страница: 167 / 284

Appendix A: Administration Features

157

This button is displayed for those groups that are not available on the

User Station yet. Click this button to add the LDAP group as a user

group with the "Device Access" privilege assigned. To modify the

privileges, see

Editing or Deleting User Groups

(on page 143).



Add selected

To select multiple LDAP users or groups at a time, select their

checkboxes and then click this button.

Configuring the Maximum Search Results and Local Authentication Settings

In the LDAP settings, you can set parameters for maximum search results and

allow access for local users.
By default, these options are disabled.

•

Max Search Results: The default limitation is 1000. If the found result

entries are more than the upper limit you set, those result entries

exceeding the maximum are not displayed but a message shows up to

remind you to specify a more accurate search filter.

•

Allow access to local users: When this setting is enabled, an option is

added to the login screen to allow users to select local authentication

instead of LDAP authentication.

To configure the maximum LDAP search results:

Click Administration > LDAP, then click the Settings button.

The Edit LDAP Settings page opens.

LDAP authentication must be enabled to set the upper limit for the LDAP

search results. To enable, select the Enabled checkbox.

Select the desired value in the Max Search Results field:

10, 100

1000

10000

Содержание Raritan Dominion User Station




























































































































































































































































































Результаты поиска

Содержание Raritan Dominion User Station

Отзывы:

LEGRAND Raritan Dominion User Station, Руководство пользователя, Страница: 167 / 284

Результаты поиска

Содержание Raritan Dominion User Station

Отзывы: